Overview - Center Armrest, Center Armrest And Backrest Cover With Trim

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Center Armrest With Cover And Trim Overview

Courtesy of AUDI OF AMERICA, LLC

Right 2/3 Section of Backrest Without Pass-Through
- Equipment levels
- Center Armrest with Cover and Trim Assembly Overview
Bracket with Hinges
- Removing and installing. Refer to FRAME WITH HINGES, REMOVING AND INSTALLING .
Cover
- Removing and installing. Refer to COVER, REMOVING AND INSTALLING .
Bolts
- Quantity: 4
- Self-locking
- Always replace if removed
- 11 Nm
Bolt
- 4 Nm
Cover
- for backrest
- Removing and installing. Refer to REAR SEAT BACKREST FRAME COVER, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
Trim
- for backrest
- Removing and installing. Refer to REAR SEAT BACKREST FRAME TRIM, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
Center Armrest
- Removing and installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
Bolt
- 0.9 Nm
Bolt
- 4 Nm
Rivet
- Rivet using the Pop Rivet PliersVAG1753B
Nuts
- Quantity: 2
- Self-locking
- Always replace if removed
- 8 Nm