Overview - Center Armrest And Backrest Cover With Trim, Fixed Rear Seat Backrest

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Center Armrest And Backrest Cover With Trim, Fixed Rear Seat Backrest Overview

Courtesy of AUDI OF AMERICA, LLC

Center Armrest
- Removing and installing. Refer to CENTER ARMREST, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
  Versions with cupholder:
- Cupholder trim, removing and installing. Refer to CUPHOLDER TRIM, REMOVING AND INSTALLING .
- Cupholder, removing and installing. Refer to CUPHOLDER, REMOVING AND INSTALLING .
Cover
- for backrest
- Removing and installing. Refer to REAR SEAT BACKREST FRAME COVER, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
Trim
- for backrest
- Removing and installing. Refer to REAR SEAT BACKREST FRAME TRIM, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
Bolt
- 4 Nm
- Quantity: 2
Fixed Rear Seat Backrest
- Equipment levels
- Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
Nut
- 5 Nm
- Quantity: 2
Bracket
- with hinges
- Removing and installing. Refer to REAR SEAT BACKREST FRAME COVER, REMOVING AND INSTALLING, FIXED REAR SEAT BACKREST .
Bolt
- 11 Nm
- Quantity: 4
- Self-locking
- Always replace if removed
Bolt
- 8 Nm
- Quantity: 2
Bolt
- 0.9 Nm