LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Rear Seats >> Locking Mechanism Trim, Removing And Installing >> Installing

Locking Mechanism Trim, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Make sure the button -2- moves easily after installing the trim.

-- When installing the trim -1-, make sure the lock cylinder installation position is correct. 6 Installing  - "Insert the lock cylinder -3- into the trim -1-, when doing this pay special attention to the position of the tab -top arrow-" (See Figure).

scientia non olet · About LEMON Manuals