Lock Cylinder, Removing And Installing, Pass-Through Door Handle: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Pass-Through Cover Lock Cylinder

Courtesy of AUDI OF AMERICA, LLC

-- Fold center armrest up.

CAUTION:

Only remove and install the lock cylinder with the key inserted correctly. If that is not done, the tumblers and compression springs can fall out and the lock cylinder will be ruined.

-- Insert the key -3- into the lock cylinder -2- correctly.

-- Turn the key 90° counterclockwise.

-- Move the pass-through door handle -1- all the way up.

-- Disengage the retaining tabs -lower arrows- and press the lock cylinder and key out of the handle.

NOTE:

Ignore the -top arrow-.