Center Bracket, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The rear seat backrest only needs to be disengaged from the mounts to remove and install the center bracket.
-- Remove the bench seat. Refer to SEAT BENCH/SINGLE SEAT, REMOVING AND INSTALLING .
-- Remove the 2/3 (right side) and 1/3 (left side) backrests. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, DIVIDED REAR SEAT BACKREST .
-- Remove the bolts -1- (quantity: 4).
-- Remove the center bracket -2- from the vehicle floor -3-.