LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Front Seats >> Storage Compartment, Removing And Installing >> Removing

Storage Compartment, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Remove the front seat:

-- Attach the front seat to the Engine/Transmission Holder - Seat Repair FixtureVAS6136. Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .

-- Open the storage compartment -1- and remove the bolts -2-.

Fig 1: Open Storage Compartment And Remove Bolts
GWWA72-11560Courtesy of AUDI OF AMERICA, LLC

-- Release the tab -arrow- on the storage compartment -2- and remove the storage compartment downward from the sill-side trim -1-.

Fig 2: Removing Sill-Side Trim Upward
GWWA72-11561Courtesy of AUDI OF AMERICA, LLC

-- Push the storage compartment -1- in direction of -arrow- and disengage the retainer -lower arrow- from the upper seat frame -2-.

Fig 3: Push Storage Compartment In And Disengage Retainer From Upper Seat Frame
GWWA72-10810Courtesy of AUDI OF AMERICA, LLC

-- Remove the storage compartment from the seat pan upper frame.