LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Front Seats >> Sill Side Trim, Removing And Installing >> Sill Side Trim, Removing And Installing, Manual Standard/Sport Seats >> Installing

Sill Side Trim, Removing And Installing, Manual Standard/Sport Seats: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Sill Side Trim -1-, Tab -2-, Retaining Bracket -3- And Locking Clips -4-
GWWA72-10673Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

NOTE:

Make sure the tab -2- is seated correctly.

Make sure the sill side trim -1- is engaged correctly on the retaining bracket -3- and the locking clips -4- are closed.

NOTE:

Make sure the wire is as close to the connector -4- as possible.

Fig 2: Disconnecting Connector At Seat Lumbar Support Adjustment Switch
GWWA72-10666Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals