LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Front Seats >> Sill Side Retaining Bracket Trim, Removing And Installing >> Sill-Side Trim Retaining Bracket, Removing And Installing, Power Standard Seat, With Or Without Memory Function >> Removing

Sill-Side Trim Retaining Bracket, Removing And Installing, Power Standard Seat, With Or Without Memory Function: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Sill Side Retaining Bracket Trim
GWWA72-10751Courtesy of AUDI OF AMERICA, LLC

-- Remove tunnel side trim panel. Refer to SILL-SIDE TRIM, REMOVING AND INSTALLING, POWER STANDARD SEAT, WITH OR WITHOUT MEMORY FUNCTION .

-- Remove the bolts -3- (quantity: 4).

-- Remove the retaining bracket -1- from the front seat -2-. Remove any cable ties from the retaining bracket.