LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 584 (Seat Frames (Sedan)) >> 72 Seat Frames >> Front Seats >> Seat Height Adjuster Handle, Removing And Installing >> Seat Height Adjustment Handle, Removing And Installing, RS Bucket Seat >> Installing

Seat Height Adjustment Handle, Removing And Installing, RS Bucket Seat: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Retaining Clamp Installation Position
GWWA72-0609Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Make sure the clip springs -2- (quantity: 2) -3- are positioned on outside of lever -1-.

scientia non olet · About LEMON Manuals