Seat Height Adjustment Handle, Removing And Installing, Manual Standard Seat/Sport Seat: Removing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove the seat height adjustment handle -1- as described. Do not drive it off the lever -2-.
If the tab -arrow- is damaged when removing the seat height adjustment handle, the handle cannot be reinstalled. It must be replaced.
-- Pull the seat height adjustment handle -1- as far up as possible and hold it in that position.
-- Carefully pull the seat height adjustment handle slightly away from the front seat.
-- Guide the T-Handle Hook 3438 between the seat height adjustment handle and the trim -2-.
-- Release the tab -3- using the T-Handle Hook 3438 and at the same time, remove the seat height adjustment handle in the direction of -arrow- from the lever.