Seat Forward/Back Adjustment And Lumbar Height Support Adjustment Motor, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting Electrical Harness Connector And Disengaging Retaining Bracket At Actuator

Courtesy of AUDI OF AMERICA, LLC

-- Remove backrest panel:

Two section backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE .
One section backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, ONE PIECE .

-- Disconnect the connector -1-.

-- Release the bracket -2- with a screwdriver -arrow-.

-- Remove the lumbar support height adjustment motor -3-.