Release Cable Mount Lever And Seat Forward/Back Adjustment Spring, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

The work can be performed with the seat installed.

-- Move the seat as far as possible up and back.

-- Disengage the release cable bracket -1- from the seat forward/back adjustment -2-.

Fig 1: Disengage Release Cable Bracket At Seat Forward/Back Adjuster

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the end of the release cable -arrow- at release cable retainer lever -3- of the seat forward/back adjuster.

-- Turn the release cable retainer lever forward and remove it >>key hole principle<<.

-- Remove the spring if necessary.