Release Cable Mount Lever And Seat Forward/Back Adjustment Spring, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
The release cable retainer lever is the same for the driver and front passenger seat. The spring is different for the driver and front passenger seat.
-- Install the spring correctly.
Release cable retainer with installed spring for the left seat:
-- Attach the spring at points -1- and -2-.
-- Turn the spring at lever -3- in a clockwise direction.
-- Place the spring around tab -4- so that it is touching -5-.
Release cable retainer with installed spring for the right seat:
-- Attach the spring at points -1- and -2-.
-- Turn the spring at lever -3- in a counterclockwise direction.
-- Place the spring around tab -4- so that it is touching -5-.