Overview - Seat Height Adjustment Motor
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Seat Pan
- Bolts
- 10 Nm
- Quantity: 2
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Bracket
- Bolted with the seat pan
- Seat Height Adjustment Motor
- Driver side: Driver Seat Height Adjustment Motor -V245-
- Front passenger side: Front Passenger Seat Height Adjustment Motor -V246-
- Removing and installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- BoltCAUTION:
The bolt has a left-hand thread.
- 18 Nm
- Self-locking
- Always replace if removed
- Removing and Installing. Refer to SEAT HEIGHT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- threaded screw holes must always be cleaned (for example, with thread cutter)
- Adjusting Spindle
- Pre-adjusted by the manufacturer
- Component of the seat height adjustment motor
- Bolts
- 28 Nm
- Quantity: 2
- Self-locking
- Always replace if removed
- Threaded holes for screws must always be cleaned, for example, with thread cutter