Overview - Lumbar Support, Four-Way Lumbar Support, Power Standard Seat
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Backrest Frame
- Rivet
- Plastic Washer
- Insert in front of the four-way lumber support riveted connection between the lumbar support bracket and the backrest frame
- Lumbar Support Forward/Back Adjustment Motor
- Driver side: Driver Seat Lumbar Support Curvature Adjustment Motor -V125-
- Front passenger side: Front Passenger Seat Lumbar Support Curvature Adjustment Motor -V126-
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT AND LUMBAR HEIGHT SUPPORT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- Four-Way Lumbar Support
- Removing and installing. Refer to LUMBAR SUPPORT, REMOVING AND INSTALLING, MANUAL FOUR-WAY LUMBAR SUPPORT .
- Lumbar Support Height Adjustment Motor
- Driver side: Driver Seat Lumbar Support Height Adjustment Motor -V129-
- Front passenger side: Front Passenger Seat Lumbar Support Height Adjustment Motor -V130-
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT AND LUMBAR HEIGHT SUPPORT ADJUSTMENT MOTOR, REMOVING AND INSTALLING .
- Support
- Engaged in the four-way lumbar support
- Velcro fasteners hold the cover to the support.