Lower Backrest Fan, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
- The mounting eyelets on the fan housing -1- face up and down.
- Place the wire -2- into the gap in the backrest cushions -arrow- facing outward.
-- Make sure the backrest lumber support spring plate is seated correctly.