DVD Player Retaining Plate, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Pull washer -3- up and slide socket -4- from the side into mount -1-.

The socket must fit in the center of the mount.

-- Hold the socket in this position and tighten the nut.

-- Install the retaining plate hooks into the backrest frame -3- -arrows-.

Fig 1: Identifying Tightening Specification, Retaining Plate For DVD Player

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts.

Tightening specifications, refer to Figure, or Figure.