Backrest Cover, Removing And Installing, RS Bucket Seat

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Pry Lever 80 - 200

Fig 1: Pry Lever 80-200
Courtesy of AUDI OF AMERICA, LLC

Procedure

Fig 2: Affixing Backrest Panel All Around Trim Using Adhesive Tape

Courtesy of AUDI OF AMERICA, LLC

-- Affix backrest panel all around trim -1- using adhesive tape -2-.

-- Using Pry Lever80-200, pry off upper backrest cover at inner side, starting from backrest panel.

-- Disengage clip at front corner of backrest panel extremely carefully.