Passenger Occupant Detection System Deactivation After A Collision, Market-Specific

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the passenger occupant detection system control module. Refer to Vehicle Diagnostic Tester.
If the seat rails and/or seat pan is replaced after an accident due to deformations resulting from a crash, the passive occupant detection system must be replaced using the "passive occupant detection system service kit". It is then necessary to perform a basic setting to the passenger occupant detection system control module. Refer to Vehicle Diagnostic Tester.