Frequent Damage
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2016 Audi A4, 2015 Audi A4, 2014 Audi A4, 2013 Audi A4, and 2012 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Check the Transmission Control Module -J217- Diagnostic Trouble Code (DTC) memory using Vehicle Diagnostic Tester before starting Fault Finding.
Additionally, check the event memory of the engine control device because errors from the engine control device can lead to transmission malfunction.
Use "Guided Fault Finding" on the Vehicle Diagnostic Tester.
Use the "Technical Product Information TPI" in the Technical Service Handbook.
To evaluate complaints and pictures of damage, use Self Study Program EX 335 Multitronic, Part 2.
Check the AFT level before starting the fault finding. Refer to ATF LEVEL, CHECKING .