LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Controls, Housing - Automatic Transmission 0B6 AWD (Coupe)) >> 37 Controls, Housing >> Specifications >> Fastener Tightening Specifications >> Securing Engine To Transmission (8-Cylinder)

Securing Engine To Transmission (8-Cylinder)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Securing Engine to Transmission (8-Cylinder)
GWWA34-10370Courtesy of AUDI OF AMERICA, LLC
Item Bolt Nm
1 M10 x 50 1) 65
2 to 6 M12 x 100 3)4) 30 + 90°
7 M12 x 175 2)3) 30 + 90°
8, 11 M10 x 60 2)3) 15 + 90°
9 M10 x 75 2)3) 15 + 90°
10 M10 x 95 2)3) 15 + 90°
A Alignment sleeves for centering
  • 1) Bolt strength rating 10.9. There is no limit to the number of times the steel bolt can be used again.
  • 2) Audi A4 through VIN 8K-9A-066499, Audi A5 through VIN. 8T-9A-007999: replace the aluminum bolts.
  • 3) Audi A4 from VIN 8K-9A-066500, Audi A5 from VIN 8T-9A-008000: the aluminum bolts may be used two times. Refer to TRANSMISSION, INSTALLING .
scientia non olet · About LEMON Manuals