LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Controls, Housing - Automatic Transmission 0B6 AWD (Coupe)) >> 37 Controls, Housing >> General Information >> Automatic Transmission Fluid Lines, Cleaning

Automatic Transmission Fluid Lines, Cleaning

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required 

Procedure 

NOTE:

Automatic transmission clean working conditions, refer to CLEAN WORKING CONDITIONS .

-- Before installing a replacement transmission, always clean out the ATF cooler and ATF pipes using compressed air (maximum 10 bar).

NOTE:

If extremely dirty ATF flows out when cleaning using compressed air, flush the ATF cooler and lines using clean ATF.