Selector Lever Cable Overview
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2010 Audi A5, and 2009 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Clip
- For selector lever cable
- Removing and installing
- Bolt
- 8 Nm
- Quantity: 2
- Selector Lever Cable
- Do not bend
- Refer to SELECTOR LEVER CABLE
- The selector lever cable must be replaced if the rubber grommet is damaged.
- Lightly lubricate ball socket with polycarbamide grease G 052 142 A2 before installing.
- Make sure the rubber grommet on the transmission side is not twisted when installing.
- Refer to SELECTOR LEVER CABLE, ADJUSTING
- Cable Mounting Bracket
- Bolt
- 13 Nm
- For selector lever cable adjustment
- Secured on the shift mechanism function unit
- O-ring
- Removing and installing
- Selector Shaft Lever