Contact Corrosion
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Contact corrosion can occur if inappropriate fasteners (bolts, nuts, washers, rivets, plugs, grommets, adhesives etc.) are used.
For this reason, the manufacturer only installs fasteners with a special surface coating. Also, rubber and plastic parts and adhesive consist of materials that do not conduct electricity. These parts, which have been tested and are aluminum compatible, are also available as replacement parts.
Note:
- Always install new parts if there is any doubt as to whether parts can be reused.
- Original equipment replacement parts are recommended. They have been tested and are compatible with aluminum.
- Audi accessories are recommended.
- Damage due to contact corrosion is not covered by warranty.