LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 575 (Maintenance Procedures (Sedan)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Noise Insulation, Removing And Installing >> Front Noise Insulation, All Except RS 4 >> Removing

Front Noise Insulation, All Except RS 4: Removing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bolts -2- as well as the bolts on the lower wheel housing liner (3x on each side).

Fig 1: Front Noise Insulation
GWWA66-10291Courtesy of AUDI OF AMERICA, LLC

-- Turn the quick-release connectors -3- 180° to the left and loosen them.

-- Remove the front noise insulation to the rear under the bumper.