Removing And Installing

WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Version 1, Removing

-- Carefully remove the engine cover from the pins -arrows-.

Fig 1: Carefully Remove Engine Cover From Bolts

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Do not pull on the engine cover abruptly to remove it or pull on one side.

Fig 2: Pulling Rear Engine Cover Off

Courtesy of AUDI OF AMERICA, LLC

Version 1, Installing

-- Using both hands, first press the engine cover in the rear onto the pins, and then, using both hands, press the engine cover in the front into the pin.

NOTE:

To avoid damage, do not hit engine cover with fist or a tool.

Version 2, Removing

-- Remove the engine cover -1- or -2- upward.

Fig 3: Identifying Engine Covers

Courtesy of AUDI OF AMERICA, LLC

Version 2, Installing

-- Position the engine cover -1- or -2- on the engine and push into the clips using both hands.

NOTE:

To avoid damage, do not hit engine cover with fist or a tool.