LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 566 (2.0L - Cooling System - Engine Code(S): CAEB, CAED, CPMA & CPMB (Sedan)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Small Coolant Pipe, Removing And Installing >> Removing

Small Coolant Pipe, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Air Intake Hose Components
GWWA21-10302Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Loosen the hose clamps -arrows- and remove the air guide hose.

-- Remove the bolts -arrows- and remove the connectors -1 through 3- from the bracket.

Fig 2: Electrical Connectors And Bolts
GWWA19-10451Courtesy of AUDI OF AMERICA, LLC

-- Loosen hose clamp -1- and lift the clamp -2- to remove the coolant hoses.

Fig 3: Small Coolant Pipe
GWWA19-10771Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the small coolant pipe.