Engine, Supporting In Installed Position

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Engine Support Bridge 10-222A

Supporting

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Position the Engine Support Bridge 10-222A with the Engine Support Bridge - Engine Support 3 10-222A/3 on the left and right suspension strut towers as illustrated.

-- Engage the Engine Support Bridge - Spindle 10-222A/11 on the engine lifting eye.

-- Lightly pretension engine with spindles.