Engine Mount, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
NOTE:
Replace the bolts that were tightened with an additional turn.
- -- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Install the tower brace. Refer to TOWER BRACE, REMOVING AND INSTALLING .