Knock Sensor, Removing And Installing: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the removed knock sensor.

NOTE:

The tightening specification influences the function of the knock sensor.

Tightening specification: Ignition System Assembly Overview. Refer to OVERVIEW - IGNITION SYSTEM .

-- Install the lower intake manifold section with the fuel rail. Refer to INTAKE MANIFOLD LOWER SECTION WITH FUEL RAIL, REMOVING AND INSTALLING .

-- Reinstall intake manifold. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .