LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 560 (3.2L - Ignition/Glow Plug System - Engine Code(S): CALA (Sedan) (As Of 01.2014)) >> 28 Ignition/Glow Plug System >> Ignition System >> Engine Speed Sensor -G28-, REMOVING AND INSTALLING >> Removing

Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation by loosening the fastening elements -1, 2 and 3-.

Fig 1: Noise Insulation Components
GWWA10-10624Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

Fig 2: Locating Engine Speed (RPM) Sensor -G28-
GWWA28-10011Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G300-.

scientia non olet · About LEMON Manuals