LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Controls & Housing - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014)) >> 37 Controls, Housing >> Selector Mechanism >> Selector Shaft Seal, Replacing

Selector Shaft Seal, Replacing

WARNING: This page is about a different car, the 2013 Audi A4, 2012 Audi A4, 2011 Audi A4, 2010 Audi A4, and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Procedure 

NOTE:

The selector shaft seal can only be replaced for removed transmissions.

-- Remove the transmission. Refer to TRANSMISSION, REMOVING AND INSTALLING .

-- Replace the selector shaft seal. Refer to SELECTOR SHAFT SEAL, REPLACING .

-- Checking. Refer to ATF LEVEL, CHECKING  after installing the transmission.

scientia non olet · About LEMON Manuals