Transmission Park Selector Switch -F305-, REMOVING AND INSTALLING
WARNING: This page is about a different car, the 2013 Audi A4, 2012 Audi A4, 2011 Audi A4, 2010 Audi A4, and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Installed location: The Transmission Park Selector Switch -F305-, which consists of two reed contacts -1 and 2-, is installed on the circuit board -B- on the Shift Lock Solenoid -N110- -A-.
The Transmission Park Selector Switch -F305- can only be replaced together with the Shift Lock Solenoid -N110-.
Refer to Shift Lock Solenoid -N110-, REMOVING AND INSTALLING .