Transmission Support With Transmission Mount, Removing And Installing: Removing

WARNING: This page is about a different car, the 2013 Audi A4, 2012 Audi A4, 2011 Audi A4, 2010 Audi A4, and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Transmission Support And Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and the transmission support with the transmission mount from the transmission.

-- Remove the bolts -1- and remove the lower stop -2- for the transmission mount.

Fig 2: Removing Bolts And Removing Lower Stop For Transmission Mount

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- and remove the transmission mount -5- from the transmission support.