LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 556 (Controls & Housing - MULTITRONIC Transmission 0AW (Sedan) (As Of 11.2014)) >> 37 Controls, Housing >> Automatic Transmission Fluid >> Transmission Drain And Inspection Plug Overview

Transmission Drain And Inspection Plug Overview

WARNING: This page is about a different car, the 2013 Audi A4, 2012 Audi A4, 2011 Audi A4, 2010 Audi A4, and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: ATF Level Checking, Draining And Filling Overview
GWWA37-11054Courtesy of AUDI OF AMERICA, LLC
  1. ATF Fill and Check Plug 
    • 30 Nm
    • Replacing
    • Depending on the version, different ATF inspection plugs and different oil level tubes are installed. Always pay attention to the allocation according to the transmission codes .
  2. ATF Oil Level Tube 
    • Depending on the version, different ATF inspection plugs and different oil level tubes are installed. Always pay attention to the allocation according to the transmission codes .
    • Always replace if removed. Refer to ATF, DRAINING AND FILLING  (See Figure and Figure). Depending on the version, different ATF inspection plugs and different oil level tubes may be installed. Always pay attention to the allocation according to the transmission codes .
  3. O-Ring 
    • Present depending on the date of manufacture
    • Not available individually
  4. Fill and Check Plug 
    • For the transmission fluid inside the front final drive
    • Tightening specification, refer to OVERVIEW - FINAL DRIVE -List item 7- "Fill and Check Plug" (See figure 1).