Tail Pipes, Replacing
WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Chain Pipe CutterVAS6254
Procedure
- Tightening specification. Refer to OVERVIEW - MUFFLER .
-- Separate the tailpipe -1- at the separating point -C- using Chain Pipe CutterVAS6254.
-- Connect the tailpipe -3- up to marking -A- so that slot on tailpipe lines up with marking -B-.
-- Tighten clamping sleeve nut -2-.