Front Muffler, Removing And Installing: Installing
WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to OVERVIEW - MUFFLER .
Install in reverse order of removal. Note the following:
NOTE:
Replace the seals and self-locking nuts.
-- Install the exhaust system free of tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .
-- Install the front crossmember. Refer to OVERVIEW - TUNNEL BRACE (See Figure) .
-- Install the rear noise insulation. Refer to OVERVIEW - NOISE INSULATION .