LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 552 (3.2L - Exhaust System & Emission Controls - Engine Code: CALA (Sedan)) >> 26 Exhaust System, Emission Controls >> Emissions Control >> Right Catalytic Converter, Removing And Installing >> Right Catalytic Converter, Removing And Installing >> Installing

Right Catalytic Converter, Removing And Installing : Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.



Install in reverse order of removal. Note the following:

NOTE:

Replace the seals and self-locking nuts.

-- Install the subframe crossbrace. Refer to OVERVIEW - SUBFRAME .

-- Install the Oxygen Sensor after Three Way Catalytic Converter -G130-. Refer to HEATED OXYGEN SENSOR, REMOVING AND INSTALLING .

-- Install the right front muffler. Refer to FRONT MUFFLER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals