Left Catalytic Converter, Removing And Installing : Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Cylinder Bank 2 Oxygen Sensor Electrical Connectors

Courtesy of AUDI OF AMERICA, LLC

The transmission is removed.

-- Remove the connector -1- for the Oxygen Sensor 2 after Catalytic Converter -G131- from the bracket and disconnect it.

NOTE:

Ignore items -2, 3, 4- and the -arrows-.

-- Remove the nuts -arrows- and the left catalytic converter.

Fig 2: Identifying Nuts, Bolt And Left Catalytic Converter

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The installation location is shown with the engine removed.

Ignore -item 1-.