Selector Lever Boot, Removing From Selector Lever Handle: Removing
WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the selector lever handle. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
-- Bind the selector lever handle spring tabs -1- together with cable ties -3-, as shown in the illustration.
-- Slide the selector lever boot sleeve -2- over the tabs on the spring tab -arrow-.
-- Remove the cable ties and the selector lever boot and sleeve from the selector lever.