Overview - Selector Lever Handle

WARNING: This page is about a different car, the 2010 Audi A4 and 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Knob, Boot And Transmission Range Position Display Unit Overview

Courtesy of AUDI OF AMERICA, LLC

Clamp
- For securing handle to selector lever
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING .
- Replacing
Trim Ring
- Removing and installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE .
Selector Lever Handle
- Removing and installing. Refer to SELECTOR LEVER HANDLE, REMOVING AND INSTALLING
Selector Lever Boot
- Removing and installing. Refer to SELECTOR LEVER BOOT, REMOVING FROM SELECTOR LEVER HANDLE
Selector Lever Transmission Range Position Display Unit -Y26-
- Removing and installing. Refer to Selector Lever Transmission Range Position Display Unit -Y26-, REMOVING AND INSTALLING