LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (3.2L - Lubrication - Engine Code(S): CALA (Sedan)) >> 17 Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disconnecting Fuel Injector Connectors
GWWA24-10407Courtesy of AUDI OF AMERICA, LLC

-- Remove the crankcase ventilation hoses. Refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .

-- Remove the left lower section of the intake manifold. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the upper coolant pipe. Refer to UPPER COOLANT PIPES, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Fig 2: Identifying Oil Separator Cover
GWWA17-10207Courtesy of AUDI OF AMERICA, LLC

-- Remove high pressure line bracket and oil separator -1-.