Oil Separator, Removing And Installing: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - CRANKCASE VENTILATION .

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install the upper coolant pipe. Refer to UPPER COOLANT PIPES, REMOVING AND INSTALLING .

-- Install the intake manifold left lower section. Refer to INTAKE MANIFOLD UPPER SECTION, REMOVING AND INSTALLING .

-- Install the crankcase ventilation hoses. Refer to CRANKCASE VENTILATION HOSES, REMOVING AND INSTALLING .