Left And Right Timing Chain Cover, Removing And Installing: Removing

Fig 1: Identifying Engine Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear engine cover -top arrows-.

-- Vehicles without a secondary air system, remove plenum chamber-bulkhead. Refer to OVERVIEW - BULKHEAD .

-- Vehicles with secondary air system: remove the applicable secondary air injection combination valve:

• Market-specific 1: Left - refer to SECONDARY AIR INJECTION LEFT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 1 .

  Right - refer to SECONDARY AIR INJECTION RIGHT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 1 .

• Market-specific 2: Left - refer to SECONDARY AIR INJECTION LEFT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .

  Right - refer to SECONDARY AIR INJECTION RIGHT COMBINATION VALVE, REMOVING AND INSTALLING, MARKET-SPECIFIC 2 .

Left timing chain cover:

Fig 2: Cylinder Bank 2 Oxygen Sensor Electrical Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Remove the electrical connectors -1 through 4- from the bracket and press to the side.

-- Free up the electric wires.

-- Remove the bolts -1 through 8- and remove the left timing chain cover.

Fig 3: Identifying Sequence Of Left Timing Chain Cover Bolts

Courtesy of AUDI OF AMERICA, LLC

Right timing chain cover:

Fig 4: Free Up Fuel Hose

Courtesy of AUDI OF AMERICA, LLC

-- Free up the fuel line -1- and the wire -2- to the EVAP canister at the air guide pipe.

-- Remove the vacuum hose -3- from the connection on the air guide pipe.

-- Remove the air guide pipe by loosening the hose clamp -4- and opening the clips -arrows-.

-- Remove the electrical connectors -1 through 4- from the bracket and press to the side.

Fig 5: Identifying Bolts -Arrows- And Right Connector Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 8- and remove the right timing chain cover.

Fig 6: Identifying Sequence Of Right Timing Chain Cover Bolts

Courtesy of AUDI OF AMERICA, LLC