Timing Mechanism Drive Chain, Removing And Installing: Removing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is removed.

-- Remove the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chains from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .

-- Remove the power take-off drive chain. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .

-- Press the drive chain tensioner guide rail in the direction of the -arrow- and secure the chain tensioner with a Locking Pin T40071.

Fig 1: Identifying Bolts And Chain Tensioner

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

Risk of destroying due to reversed running direction on a used drive chain.

Mark the drive chain running direction with arrows using paint for installation later. Do not mark the chain using a punch, notch or similar.

-- Remove the bolts -1- and the guide rail.

-- Remove the bolts -2- and the chain tensioner.

-- Remove the timing mechanism drive chain.