Left Engine Mount, Removing And Installing: Removing

Fig 1: Connecting/Disconnecting Coolant Hoses With Hose Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Place the Used Oil Collection and Extraction Unit VAG1782 under the engine.

-- Remove the bolts -arrows- and move oil cooler to the side with the coolant hoses -1- and -2- still connected.

-- Remove on vehicles with After-Run Coolant Pump -V51- (refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING ) and remove the engine oil cooler. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .

-- Remove the A/C compressor. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING .

Fig 2: Identifying A/C Compressor & Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear engine cover -top arrows-.

Fig 3: Identifying Engine Covers

Courtesy of AUDI OF AMERICA, LLC

-- Install the Engine Support Bridge 10-222A with the Engine Support - Movable Joint T40091/3 on the left and right suspension strut tower, as shown in the illustration.

Fig 4: Position Engine Support Bridge 10 - 222 A

Courtesy of AUDI OF AMERICA, LLC

-- Engage the Engine Support Bridge - Spindle 10-222A /11 on the right engine lifting eye.

-- Install additional Engine Support Bridge 10-222A components as shown in the illustration. Position the engine support brackets T40093/3 on the notches on the longitudinal members.

Fig 5: Identifying Additional Engine Support Bridge 10 - 222 A

Courtesy of AUDI OF AMERICA, LLC

-- Engage the Engine Support Bridge - Spindle 10-222A /11 on the left engine lifting eye.

-- Lightly pretension engine with spindles.

-- Remove the left subframe bolt -2-.

Fig 6: Identifying Subframe Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the left engine mount bolts -1-, -3- and -4-.

Fig 7: Identifying Left Engine Mount Bolts -1-, -3- And -4-

Courtesy of AUDI OF AMERICA, LLC

-- Move the left engine mount retaining plate -2- to the side.

-- Remove the left engine mount.