BELT PULLEY, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR, VERSION "2": Notes
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2016 Audi S4, 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi S4, and 2015 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
A/C compressor without A/C Clutch -N25-
NOTE:
Courtesy of AUDI OF AMERICA, LLC
Observe notes on replacing belt pulley. Refer to OVERVIEW - BELT PULLEY, "Denso" A/C COMPRESSOR, VERSION "2" .
Perform preparatory work as for removing belt pulley. Refer to PRELIMINARY WORK FOR REPLACING BELT PULLEY .
The belt pulley is made of plastic and is sensitive to impact, therefore take special care when handling it.
If overload safeguard of drive plate -C- has triggered, drive plate can be pried off from belt pulley -D- after removing circlip -A-
To optimize noise reduction, a circlip -A- with a rubber disc vulcanized on it is installed. Refer to OVERVIEW - BELT PULLEY, "Denso" A/C COMPRESSOR, VERSION "2" .