Fan Shroud, Removing And Installing: Installing
WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specification. Refer to OVERVIEW - RADIATOR/COOLANT FAN .
Install in reverse order of removal. Note the following:
-- Install the air duct on the air filter housing intermediate flange. Refer to OVERVIEW - AIR FILTER HOUSING .
-- Install the lock carrier cover. Refer to Front Bumper .
-- Install the bumper cover end plate. Refer to OVERVIEW - BUMPER COVER .
-- Install the front noise insulation. Refer to OVERVIEW - NOISE INSULATION .