LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 543 (3.2L - Cooling System - Engine Code: CALA (Sedan)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING >> Installing

Engine Coolant Temperature Sensor -G62-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

To prevent coolant loss, immediately insert new Engine Coolant Temperature Sensor -G62- in the connections.

-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING => .

scientia non olet · About LEMON Manuals