Coolant Thermostat, Removing And Installing: Installing

WARNING: This page is about a different car, the 2009 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specification. Refer to OVERVIEW - COOLANT PUMP/THERMOSTAT .

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

-- Install front coolant pipe. Refer to FRONT COOLANT PIPES, REMOVING AND INSTALLING .

-- Install the intake manifold upper section. Refer to Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING .

-- Fill the coolant. Refer to FILLING .